Author: Aaron Gordon
Date: 02:25:31 09/01/00
Go up one level in this thread
On September 01, 2000 at 04:14:29, Jouni Uski wrote: >Stunning NPS! What kind of PC You have?? > >Jouni Actually right now I don't think the NPS is too too stunning heh, but thanks. I had a motherboard go bad recently (Abit Be6-2) so I'm running a spare Abit Bx6-2. Due to the lack of FSB speeds (Front side bus) I can only run my Celeron-2 566MHz at 993MHz where as on the Be6-2 I ran a steady and stable 1065MHz. If you're wondering what I'm using to cool the chip then check this out =). I'm using a liquid cooled 72 watt melcor 40mm peltier w/ chilled liquid. The water is around 60F and the cpu's internal temp (has an on-die temp. sensor) reads ~10F, the 1.75"x1.75"x1/8" copper block (between the cpu & peltier(helps to conduct the heat)) register's at about -5F with the thermistor placed on it. I figure this isn't too bad of a chess box seeing how the cpu only cost about $100 and the cooler about $50-60. 993MHz seems kind of skimpy and hopefully soon Abit will be sending me the Be6-2 back so I'll be up at 1065 again.
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.