Author: Chessfun
Date: 20:18:34 11/12/01
Go up one level in this thread
On November 12, 2001 at 21:53:56, Tanya Deborah wrote: >On November 12, 2001 at 21:13:26, Chessfun wrote: > >> >>Running Fritz 7 (No MMX) must be done from an interface other than Fritz 7 >>as No MMX isn't shown. This is already known. >> >>Running it in another interface such as Deep Fritz results in the following; >> >>If running Fritz 7 (No MMX) in a tournament then the name Fritz 7 (No MMX) >>shows correctly in the PGN. >> >>If running an eng v eng match it will read Fritz 7 when it should read >>Fritz 7 (No MMX) >> >>So, you must be careful to identify the engine which played. >> >>Therefore when playing Fritz 7 v Fritz 7 (No MMX) as an engine match the >>resulting pgn will read something like as follows. >> >>[Event "TB 1400"] >>[Site "Scarb"] >>[Date "2001.11.12"] >>[Round "1"] >>[White "Fritz 7"] >>[Black "Fritz 7"] >>[Result "1/2-1/2"] >>[ECO "E15"] >>[PlyCount "109"] >> >>In this case No MMX was white. >> >>Sarah. > > >Hi Sarah! > >Thanks for the information!. > >But also i have other problem. I can´t run my Fritz7 engine (430.080 kb) into >the Fritz 5.32 interface. It doesn´t load. What Fritz 7 do i have?? I'm not sure I understand the question. AFAIK there is only one Fritz 7. The size you indicate is it. Fritz 7 (NoMMX) is about 350 kb. If you installed Fritz 7 you should see both engines by opening your engine folder in Explorer. >Can you run Fritz7 into F.532 interface ???? If you can, please let me know.. Both engines Fritz 7 and Fritz 7 (NoMMX) run in Fritz 5.32. Though Fritz 7.eng did ask for a CD check. Each engine is identified correctly at least in analysis mode. Sarah.
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.