Author: Y A Tham
Date: 12:52:06 01/03/02
Go up one level in this thread
I am thinking of getting a new system. If I had the Epox 8KHA+, Athlon XP1800,DDR ram and a good heatsink and fan; how high can I safely run it at? What should the settings be? Thanks in advance. On January 03, 2002 at 12:44:47, Aaron Gordon wrote: >This was run on an Asus A7V266-E at 1.85v. My previous motherboards I have been >able to voltage mod (up to 2.3v) however this one I cannot. This board was >given to me by AMD (along with the rest of the system) to do optimization for >Quake3.. and I have to keep this hardware configuration for benchmarking. > >Now, if I had a choice on which motherboard to get then it would have been the >Epox 8KHA+. It has the KT266a chipset and you can voltage mod the vcore & the >ddr voltage. The board can also run up to 210fsb(420DDR) with the use of 1/5 & >1/6 pci dividers and 2/6 & 1/3 agp dividers. Also at speeds higher than 170fsb >an option in the bios appears so you can enabled a 3/4 ram divider. That way you >can run 200fsb (400DDR) and run your ram at 150fsb(300ddr) and have your PCI/AGP >at stock speeds. Best of all it's only $99 :) > > >On January 03, 2002 at 08:30:55, K. Burcham wrote: > >> >> >>Aaron thanks for running this. >> >>what motherboard are you using? >> >>are you able to use a stock voltage setting, or did you have >> to modify the motherboard to get the voltage you needed? >> >>kburcham
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.