Author: Lex Loep
Date: 12:44:20 01/23/02
Go up one level in this thread
On January 23, 2002 at 09:45:13, Harald Faber wrote: >On January 23, 2002 at 07:55:03, Harald Faber wrote: > >>On January 23, 2002 at 07:46:00, Jeroen van Dorp wrote: >> >>>On January 23, 2002 at 07:31:53, Harald Faber wrote: >>> >>>>There is some big trouble with the TB access with the Tiger engines when Gandalf >>>>5 is installed (Chesspartner 5.1). >>>>Neither in the Chesspartner 5.0 nor in the 5.1 GUI the Tigers access the TBs >>>>anymore although the path is correct and the same as when Gandalf engine runs. >>> >>>I installed Rebel Tiger in the directory e:\schaken\rebel\cp (coming with GT2 >>>and CT14, and the CP5.0 GUI). >>>Then I installed Gandalf in the same directory. The GUI was properly updated to >>>CP5.1 and everything works. I had to register the CT14 and GT2 engines however >>>under the updated GUI! >>> >>>Could it be that -if you went on differently- this might work for you too? >>> >>>Good luck anyhow. >>> >>>Jeroen >> >>This could be the solution: >>On my A-600 I have installed Tiger in H:\Rebel11\Tiger2 and afterwards installed >>Gandalf 5 in E:\Gandalf5 >>Trouble. >>Now tried on my A-500. Eveything working fine. BUT: Installed Tiger 2 in >>E:\Rebel11\Tiger2 and Gandalf 5 in E:\Rebel11\Gandalf5 >> >>So it seems to be VERY important WHERE to install the GUIs. >> >> >>Ed, you should point that out very clearly! > >This is not the solution. De-Installed Gandalf 5 and re-installed into >H:\Rebel11\Gandalf5, still problem. And finally installing into >H:\Rebel11\Tiger2 does not work. > >As there is at least one other guy (see Rebel Tiger board) having the same >problem, Ed/Lex should look it up. >I have no idea any longer. Here on my development machine both gandalf 5 and the two tigers work fine in ChessPartner 5.1 As this is a development machine the directory where things are wildly varies. I suggest you try to keep everything in CP 5.1 as that is the latests. then in the about box you can check where it actually loads the engines from and the version numbers. If this is not correct or the engines don't appear you can use the Install engine function to re-register the engines. The tiger engines dll names are: chesstiger.dll and chesstigerg.dll for gandalf the engine dll name is gandalf.dll If you are sure you have the correct engines, then go check the engine property pages for the correct tb path and possible cache sizes. After changing be sure to select -> Extra -> Safe settings Lex
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.