Author: Robert Hyatt
Date: 08:31:51 06/25/98
Go up one level in this thread
On June 25, 1998 at 09:59:35, Inmann Werner wrote:
>On June 25, 1998 at 06:37:56, Vincent Diepeveen wrote:
>
>>
>>On June 25, 1998 at 05:50:22, Inmann Werner wrote:
>>
>>>I have the noname auto232 driver of Donninger. I want to make make a null-modem
>>>cable for auto232. Does anybody know, which pins on the cable must be connected
>>>with which of the other side? (oh my englisch...)
>>>Please help!!!
>>>
>>>Werner
>>
>>You should buy one instead of illegally copying software.
>
>I never do illegal software copying!!!!!!!
>i bought a book, where Chris Donninger was co-author. with this book came a
>cd-rom with the auto232 noname driver included and the full nimzo2 source-code.
>To make a cable by myself is not illegal in any case.
>So don´t say, i do robbery!!!!!!!!!!!!!!
>
>Werner
here's what you need to do:
connect the following pins..
end A end B
pin1------------------------------pin1
pin2------------------------------pin3
pin3------------------------------pin2
pin4---- ----pin4
| |
pin5---- ----pin5
pin6---- ----pin6
| |
pin8---- ----pin8
| |
pin20--- ---pin20
in english:
connect pin 1 to pin 1,
connect pin2 on one end to pin3 on the other end
connect pin3 on that end to pin 2 on the other end
on each end, connect pin 4 to pin 5, but do not connect
to the other end at all. ditto for connecting pins 6,8 and
20 on each end.
that's the simplest null-modem cable you can make.
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.