Author: Eduard Nemeth
Date: 12:39:28 02/26/02
Go up one level in this thread
On February 26, 2002 at 09:03:52, Odd Gunnar Malin wrote: >On February 25, 2002 at 20:05:09, Eduard Nemeth wrote: > >>Durch einen Tip dass es einen neuen Malin Wb2UCI-Adapter gibt (ja, Datum ist der >>25.02.02!), downloadseite >> >>http://home.online.no/~malin/sjakk/download/Wb2Uci.zip >> >>habe ich einen neuen Anlauf gemacht, den Gandalf 5.1 als UCI in Fritz 7 >>einzubinden. >> >>Fazit: mit dem neuesten Adapter (auch unter Win 98) klappt nun auch der >>Analysemodus problemlos, sowohl was Analysen der Stellungen angeht, als auch >>Analysen von Partien selbst wenn man schnell von Stellung zu Stellung springt! >> >>Hier meine Config der Wb2UCI.ENG: >>------- >>[ENGINE] >>Name=Gandalf 5.1 >>Author=Steen Suurballe >>Filename=Wb2Uci.exe >>[OPTIONS] >>Program=Gandalf51 xboard > > > >>InitString=polar >>HashCommand=hash %iM >>Hash=32 >>HashOnCommandline=false > >:) >This is from the sample eng file that I put in the zip-file. I do most of my >tests with my own engine so the sample file is to setup PolarEngine with added >all options that is default and strictly don't need to be in the file. > >InitString should be set if the engine need to be feeded with any other command >than the normal xboard\nnew .. >For my engine I have a command 'polar' that enables comands that isn't strictly >xboard f.ex. 'hash'. > >The hashsetting is also a polarengine command but this is quite common som many >engine use it like this. Some without the last 'M'. The '%i' is where the hash >number should be put in the string. The UCI-protocol say that this number is in >MB. >Hash is the default hashsize, the UCI-protocol recommend this to be a small >number, but it isn't important on the GUI's I have tested because the adapter is >getting the GUI's hashvalue before it set up the engine. >Finaly the HashOnCommandline is a booleon switch you could set to true if the >string you gave in 'HashCommand' should be put on commandline rather than as a >command after the engine has started. Ex. 'gerbil.exe -ht 16' > >I don't have Gandalf so I don't know how this should be setup for this engine. > >Based on your setup I would propose this. > >[ENGINE] >Name=Gandalf 5.1 >Author=Steen Suurballe >Filename=Wb2Uci.exe > >[OPTIONS] >Program=Gandalf51 xboard >HashCommand=hash %iM >Edit=edit >Logfile=true > >You could check the manual or start the engine in console mode to check how this >hash settings should be if it is possible to set it. >Also do a check if it need edit for setup the board. Most newer engine use >setboard, but I have seen from log's that edit work. If it support setboard also >it's better to use that because of the missing castling and enpassant >information in 'edit'. > >Odd Gunnar Thank You Odd Gunnar! Yes this your Config for Gandalf is right an Gandalf runs also perfect under Fritz7! German: Deine angegebene Config. (Wb2UCI.eng) für Gandalf 5.1 habe ich so ausprobiert und Gandalf läuft so bestens unter Fritz 7. Gandalf nimmt sich tatsächlich seine hashgröße aus seiner *.ini (*.res) das habe ich enbenfalls getestet. Best wishes, Eduard
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.