Author: Christophe Theron
Date: 16:31:12 03/14/02
Go up one level in this thread
On March 14, 2002 at 17:35:49, Rafael Vasquez wrote:
>On March 14, 2002 at 09:38:00, Christophe Theron wrote:
>
>>On March 14, 2002 at 03:01:51, Richard A. Fowell wrote:
>>
>>>
>>><snip>
>>>>To give you a rough idea of the strength, here is some data:
>>>>
>>>>
>>>>On my Palm m505, I get a TigerMark index of 1.35
>>><snip>
>>>
>>>Hmmm? On my Palm m500 I get a TigerMark index of 0.79,
>>>but I thought that the m505 and m500 had the same clock speed.
>>>
>>>Are you using an overclocking program?
>>>
>>>Richard
>>
>>
>>
>>Yes I forgot to mention that I'm using AfterBurner 3.1.
>>
>>My Palm m505 runs at 54MHz.
>>
>>
>>
>> Christophe
>
>Christophe, did really you find the way to run at 54 mhz, I thougth that the
>maximum was 45 mhz for the m505
>
>Rafael
I did nothing special. AfterBurner allows to go up to 54MHz, and my m505 runs
fine at that speed.
I have checked that there is no adverse effect. It is running at that speed
since last August. I have also checked that the clock (time) is accurate.
But when you set the speed to a given value with AfterBurner, you might actually
get a different value. That's not AfterBurner's fault, the problem is the
DragonBall hardware (the PLL: frequency generator).
There is little difference between the 54 and 45 MHz settings, so I suspect that
it is not really running at 54MHz.
Christophe
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.