Author: Odd Gunnar Malin
Date: 11:00:58 09/19/02
Go up one level in this thread
On September 19, 2002 at 10:19:17, Harald Faber wrote: >On September 19, 2002 at 05:21:42, Odd Gunnar Malin wrote: > >>On September 19, 2002 at 04:43:07, Harald Faber wrote: >> > >>>The only way it PARTLY works ist when I enter the PC2-IP in Fritz and the >>>PC1-name in CP and set CP to master. After clicking OK in Fritz, the above >>>described dialogbox arises, when I then click OK in CP, the dialogbox in Fritz >>>suddenly disappears (but the extra->hardware dialog still open) and CP starts >>>with the first move, Fritz gets this move, answers but Fritz' move does not >>>appear on CP board. This happens without chosing File->New->2 PCs in Fritz. And >>>I wonder why this is started and why CP does not get Fritz' move. >>>Any idea? >> >>Was both Master here? > > >No! As I wrote, I didn't get to the point to select master/slave in Fritz! > Sorry I was missing the part where you enter slave/master in Fritz. The IP adress on the slave machine is supposed to be the 'dot' that is allready in the servername field, eg. you should not write any ip if Fritz is the slave. But anyway, I did get the same as you when I tried Fritz as slave now. You don't get through the dialogs and you see two moves at the slave machine and 1 move at the Master machine. I tried both CP,Shredder and Fritz as master against Fritz as slave. Maybe there is something broken in the slave code in Fritz. It have worked sometime I think, because when I got my Shredder 6 I tried this and got it to play. So maybe the version on the Shredder CD is ok here, but then it have this timecontrol problem. Fritz as master seems to work OK here. To compare: CP5.2 ver. 5.2.0.28 Fritz ver. sep 6 2002 Shredder ver. original from CD 27.nov.2001 Odd Gunnar Malin Odd Gunnar
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.