Author: john rice
Date: 09:26:22 09/29/02
Go up one level in this thread
Most of the newer XP2200+ processors are shipping with a newer stepping code. Granted they are not Rev. B, but they do run a little cooler and overclock better. My stepping code is AIRGA 0226, and has been running at 2Ghz (10 multiplier and 200fsb w/corsair 3200!) with only 1.85volts for a couple of months now. Using the SLK-800 and Delta 80mm fan with speed control, my temps are quite good (95f idle)and the sound is very reasonable. So what does all this get me? Try a Fritz7 mark of 1634(5.0s) and 1134kN/s with Hash=64MB. On September 29, 2002 at 02:09:34, John Smith wrote: >On September 29, 2002 at 00:44:28, Tim Blankenship wrote: > >>i hear all you guys talking about overclocking your pc's to make them faster or >>what not well ive got a AMD 2200+ XP on the way and im just curious on how i >>would overclock it if i wanted to...thx > > >See if you can cancel the order. The 2200xp is 1800mhz and it can be unlocked >via the L5 bridge. Just one bridge to connect instead of the 5 required for >xp1600 to 2000. However, the problem with the 2200xp is that it is incredibly >hot and the max overclock you can expect is about 1900 unless you have an Epox >board with voltage settings up to 2.25 in which case you may be able to hit 2000 >with either watercooling or thermalright sk600 or 800 with an 80mm tornado fan. > >The problem is that the newer AMDs, 2400 and 2600, will overclock higher and be >much cooler. > >Your call.
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.