Computer Chess Club Archives


Search

Terms

Messages

Subject: Re: Tablebase Problem

Author: Joshua Lee

Date: 07:40:49 01/24/03

Go up one level in this thread



[D] 8/5Np1/4kbP1/7p/8/4K3/8/8 w - - 0 1

Analysis by Fritz 7:

1.Kf4
  µ  (-0.91)   Depth: 11/20   00:00:00  126kN, tb=4
1.Ke4!
  µ  (-0.87)   Depth: 11/20   00:00:00  179kN, tb=6
1.Ke4!
  µ  (-0.72)   Depth: 11/20   00:00:00  211kN, tb=8
1.Ke4 Bc3 2.Nh6 h4 3.Nf5 h3 4.Nxg7+ Kd7 5.Nh5 h2 6.Ng3 Ke6
  ³  (-0.56)   Depth: 11/20   00:00:00  251kN, tb=8
1.Ke4 Bc3 2.Nh6 h4 3.Nf5 h3 4.Nxg7+ Kf6 5.Nh5+ Kg5 6.Kf3 h2 7.Kg2 h1Q+ 8.Kxh1
  ³  (-0.50)   Depth: 12/19   00:00:01  355kN, tb=13
1.Ke4 Bc3 2.Nh6 h4 3.Nf5 h3 4.Nxg7+ Kf6 5.Nh5+ Kg5 6.Kf3 h2 7.Kg2 h1Q+ 8.Kxh1
  ³  (-0.50)   Depth: 13/22   00:00:02  543kN, tb=32
1.Kf4!
  ³  (-0.47)   Depth: 13/22   00:00:02  686kN, tb=45
1.Kf4 Bh4 2.Nh6 Kf6 3.Nf5 Bg5+ 4.Ke4 h4 5.Nxg7 Bh6 6.Ne6 Kxg6
  ³  (-0.41)   Depth: 13/22   00:00:03  799kN, tb=56
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3
  ³  (-0.28)   Depth: 14/23   00:00:06  1340kN, tb=167
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3
  =  (0.00)   Depth: 15/25   00:00:10  2082kN, tb=360
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3
  =  (0.00)   Depth: 16/27   00:00:13  2806kN, tb=610
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3
  =  (0.00)   Depth: 17/30   00:00:19  3876kN, tb=1048
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3
  =  (0.00)   Depth: 18/32   00:00:27  5505kN, tb=1835
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3 Kf6 6.Nf7 Kxg6 7.Nd6 Be5
  =  (0.00)   Depth: 19/34   00:00:39  8407kN, tb=3424
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3 Kf6 6.Nf7 Kxg6 7.Nd6 Be5
  =  (0.00)   Depth: 20/37   00:00:56  13009kN, tb=5914
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3 Kf6 6.Nf7 Kxg6 7.Nd6 Be5 8.Nc4
  =  (0.00)   Depth: 21/38   00:01:24  20885kN, tb=10241
1.Kf4 h4 2.Nh6 h3 3.Kg3 h2 4.Kxh2 Bd4 5.Kh3 Kf6 6.Nf7 Kxg6 7.Nd6 Be5 8.Nc4
  =  (0.00)   Depth: 22/41   00:02:06  34666kN, tb=17248

(Lee, N.B.I 24.01.2003)

271Kn/s that's it!

Either Way i would like a higher capacity drive this one is 30GB, the 20GB
seagate i was using had a seek time of 8.2ms which at the time was about as fast
as you could get for IDE but it's ATA 66. When the third generation
Serial ATA drives come out then it's time to upgrade they are supposed to be
about 300MB/s



This page took 0 seconds to execute

Last modified: Thu, 15 Apr 21 08:11:13 -0700

Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.