Computer Chess Club Archives


Search

Terms

Messages

Subject: Re: How can I tweak Shredder 7's hash size above the limit?

Author: Michael P. Nance Sr.

Date: 06:21:20 09/14/03

Go up one level in this thread


On September 13, 2003 at 21:06:11, William Penn wrote:

>On September 13, 2003 at 09:57:41, Michael P. Nance Sr. wrote:
>
>>On September 13, 2003 at 09:48:31, Michael P. Nance Sr. wrote:
>>
>>>On September 13, 2003 at 09:21:59, m.d.hurd wrote:
>>>
>>>>On September 13, 2003 at 08:59:34, William Penn wrote:
>>>>
>>>>>On September 13, 2003 at 07:30:49, m.d.hurd wrote:
>>>>>
>>>>>>On September 12, 2003 at 21:40:13, William Penn wrote:
>>>>>>
>>>>>>>[running Shredder 7 with the March 2003 GUI update]
>>>>>>>
>>>>>>>I have 1024MB (1GB) RAM. My video graphics siphons off 32MB, leaving 992MB
>>>>>>>available. Shredder 7 therefore decides, by some kind of internal formula, that
>>>>>>>my maximum allowed hash shall be 784MB. It refuses to allow me to set it any
>>>>>>>larger. No matter what I've tried, it reverts to 784MB or less.
>>>>>>>
>>>>>>>Note: For those who have 1GB RAM free and clear (100% available), the hash limit
>>>>>>>shall be 816MB instead of my 784MB. (784+32=816) I expect this is the same
>>>>>>
>>>>>>On my machine it is 819 MB
>>>>>>
>>>>>>
>>>>>>>the Fritz 8 GUI, which I believe is identical to the Shredder 7 GUI. Of course
>>>>>>>I'm talking about the Chessbase GUI, not the Classic Shredder one.
>>>>>>>
>>>>>>>I really should be able to set my hash to 800MB (or perhaps a little more)
>>>>>>>without a serious system problem, but the Shredder won't allow it. It would take
>>>>>>>a little longer for the swapfile, but that's OK with me. I'm not in a big hurry!
>>>>>>>I only run Shredder in infinite mode for an hour or more anyway, so I don't care
>>>>>>>if it takes 5 minutes for the swapfile. If it is taking too long, I can always
>>>>>>>abort it. But Shredder 7 refuses to give me that option...
>>>>>>>
>>>>>>>Yes, I know it won't help the engine's strength significantly, but I'd like to
>>>>>>>try it nevertheless. Maybe I just like round numbers -- 800MB sounds better to
>>>>>>>me than 784MB!
>>>>>>
>>>>>>Go here for info : http://www.chessbase.com/support/support.asp?pid=199
>>>>>>
>>>>>>
>>>>>>>Anybody know a tweak to allow this? I've tried some obvious tweaks with the .ini
>>>>>>>files, and looked around in the system registry, but didn't get lucky. If anyone
>>>>>>>knows how to do this, I'd very much like that info.
>>>>>>>Thanks.
>>>>>>>WP
>>>>>>
>>>>>>Regards
>>>>>>
>>>>>>Mike
>>>>>
>>>>>Based on the formula in that article...
>>>>>
>>>>>HT[KB] = 2.0 * PFreq[MHz] * t[s]
>>>>>
>>>>>I have a 2.0MHz processor, and analyze each move for at least 1 hour (3600
>>>>>seconds) in Infinite Analysis mode. I do not use any other time controls.
>>>>>Therefore my optimum hash size would be 14.4GB. So obviously I should set my
>>>>>hash as high as possible for optimum results.
>>>>>
>>>>>However that isn't possible with the current Shredder 7/Fritz 8 GUI. When you
>>>>>enter a larger-than-recommended-maximum hash size, it asks whether it should
>>>>>ignore the recommended maximum size (Yes/No). Then it completely ignores your
>>>>>choice, and refuses to set the hash to whatever you've entered if larger than
>>>>>the recommended maximum. That is presumably a bug in their algorithm's logic,
>>>>>and I need to know how to get around it (tweak it, so it works correctly)...
>>>>>WP
>>>>
>>>>The highest mine will go is 818 MB. I would guess that the programmers have been
>>>>consertavative and assumed windows will take a chunk of memory plus the gui of
>>>>chessbase and calculated that around 80% should be the maximum available which
>>>>prevents a new user from crashing his machine.
>>>>
>>>>Regards
>>>>
>>>>Mike
>>>
>>>I have serval Boxes with a gig(1024 mb) of memory. Each one reverts back to 818
>>>when You click for a new game. I always hit the optimization and it then sets to
>>>819. This is for Fritz,Junior,and Shredder. This is the highest allowed by
>>>Chessbase ,so You don't BLUE SCREEN. Altho, I have played beyond that setting
>>>,with crahing.>>>>Mike
>>that should be WITHOUT CRASHING
>
>Thanks guys. I guess nobody knows how to do it. I'll keep looking.
>
>I only had 128MB RAM in this Walmart machine when I took it out of the box. I
>installed Shredder 7 and was able to use 48MB hash, no problem, although of
>course the system was sluggish. I lowered that to 32MB hash and didn't have any
>problems with it.
>
>Then I put in 1024-128=896MB more RAM (1G total). So I really should be able to
>try a setting of 32+896=928MB hash. Certainly I could use 900MB hash and there
>wouldn't be a computer crash. Yet Shredder 7 arbitrarily decides that I shall be
>limited to 784MB hash. I don't like it! I should have the option to try whatever
>hash size I wish. And it really SHOULD work that way, but the operation involved
>is buggy - it seems to me.
>WP
I beleive the size of Your Box limits Shredder not Shredder. Because Mine go way
higher than that. >>>>Mike



This page took 0.02 seconds to execute

Last modified: Thu, 15 Apr 21 08:11:13 -0700

Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.