Author: John Charles
Date: 13:49:39 09/27/03
Go up one level in this thread
On September 27, 2003 at 16:38:40, Michael P. Nance Sr. wrote: >Ok I got to the point to where both of the Computers display the Auto232 >Window,both have the auto 232 1.0 highlighted,both have a dot for com port 1,I >check the sever name box,designate one as the Master and the other Slave,click >ok and the WAIT FOR CONNECTION Window come up and go away after about 20-30 >seconds. I know I have the correct Cable ,becuase I used It to play auto-match >between 2 Tiger 14 Engines before. I only have 1 place to install the Cable on >the back of 1 P/C and 2 places on the back of the Other. I have tried switching >Them up to no avail,(the 2 different com-ports on the second P/C). I seem to >remember have to set how many Games would be played between the 2 P/Cs >before,but nothing like that comes up now. Both P/Cs show waiting for >connection,but thats as far as I've gotten. Send in the Marines?>>>>Mike This is all I do. Decide which is to be slave set that up with connect hardware. The other comp, which has to be master. Set that up. Click ok and point to the comm port. Make sure you have set up the comm ports as you are descibing them. The master machine should stick up the dialog box to be filled in. Time setting, program on slave machine. Click Okay. Sit back and watch the fireworks!! JC
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.