Author: margolies,marc
Date: 18:12:16 02/08/04
Go up one level in this thread
aaron, Hi! question- can i do that with registered memory? also on opteron I think clock speed is coded into the chip directly. can you direct me to some web resources which would allow me to research your recommendations until they enter my comfort zone? On February 08, 2004 at 16:41:19, Aaron Gordon wrote: >On February 08, 2004 at 16:30:24, margolies,marc wrote: > >>ps i am using 2700 ram (333) in dual channel config. i require athlonFX to use >>faster ram with my chipset ( nforce150 pro) > >Try pushing the ram up to 200fsb/400DDR and raising your ram timings. CAS 2.5 or >3 should do the trick. This is considered overclocking however. > >I'm also using PC2700 ram (rated at 166/333) but at low timings (3-4-4-9) it >will do 230MHz/460DDR (equivalent of PC3700). > >All of the settings will be in the bios. If you cannot push your memory higher >than the fsb and your fsb is running 166fsb/333DDR for whatever reason you can >set your multiplier to 10x and the fsb to 200. You may need to increase your >memory voltage as well. I run 2.73v to my PC2700 (2.5v is default). You'll be >fine as long as you stay under 3.00v.
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.