Author: Albert Silver
Date: 04:49:16 12/10/99
Go up one level in this thread
On December 09, 1999 at 13:52:48, Leon Stancliff wrote:
>On December 09, 1999 at 09:59:19, Albert Silver wrote:
>
>>On December 09, 1999 at 08:57:15, Leon Stancliff wrote:
>>
>>>I attempted to run the LC11 test after removing the positions that required 600+
>>>seconds. When I did so, the time required for the rest of the positions nearly
>>>doubled in most cases and was reduced in a couple of others.
>>>
>>>Can anyone suggest what might have caused this?
>>
>>What programs and how were you testing?
>>
>> Albert Silver
>
>I was using Hiarcs 7 on the MacIntosh 7600 with a Newer Technology G3 275/183
>card installed. I used to be able to run the LC11 test suite by simply purging
>the edp and then giving the command to analyze the epd. For some reason I do not
>seem to be able to do this any more. Whenever it arrives at the 600+ positions
>it fails to move on to the next position automatically. I thought perhaps
>removal of the 600+ positions would allow the rest to move through the rest
>without blocking. I do not wish to spend the time to do each of the positions
>independently because of the total time involved. I wish to run all of the
>positions except the 600+ on both my present setup and on a G4 400 and make time
>comparisons.
> If you can offer a suggestion as to how I can make the operation move through
>the 600+ positions without blocking the automatic move to the following position
>I would appreciate it. That would serve the same purpose.
Sorry, I don't have the Mac version. Try contacting the Hiarcs people.
Albert Silver
This page took 0 seconds to execute
Last modified: Thu, 15 Apr 21 08:11:13 -0700
Current Computer Chess Club Forums at Talkchess. This site by Sean Mintz.